COOL5 2w1 SUMMER AC RECHARGE R134a + Refreshing Bomb
Original price was: 38,99 €.31,99 €Current price is: 31,99 €.
FEATURES AND APPLICATION:
COOL5 is an innovative one-pack product that was modelled on the service procedure that is used in specialised workshops.
Discover the best solution for your car’s air conditioning with the COOL5 Summer Full KIT AC Repair system. This innovative product combines r134a gas replacement with the necessary lubricating oil to provide a complete repair and recharge solution for vehicles manufactured between 1995 and 2016. With a net weight of 290g, the COOL5 kit provides a remarkable 70% increase in product capacity, equivalent to more than 850g of standard refrigerant, for long-lasting and effective cooling.
With COOL5 Desinfection BOMB you will get rid of fungus, mould and viruses from the air vents and grilles in your car. All you have to do is set the air conditioning vent to maximum and the temperature to minimum and place the COOL5 Desinfection BOMB can behind the driver’s seat and press the COOL5 Desinfection BOMB activator button and leave it in the car for about 10 minutes. During this time, the contents will refresh the interior of the vehicle, including carpets, upholstery and headliner as well as air conditioning ventilation ducts. This will restore a fresh atmosphere in your car and neutralise unpleasant odours.
By applying COOL5 Summer AC Recharge+Oil – a replacement for R134a – you are replenishing the two most essential substances in the formulation for your air conditioning system:
STEP 1: lubrication process of the system compressor with synthetic oils that
are recommended by leading A/C compressor manufacturers.
STEP 2: the process of REFILLING the refrigerant, which is a mixture of hydrocarbon gases that successfully mixes with all commercially available refrigerants, so that the A/C system is replenished with the missing, required dose of refrigerant.
Read the accompanying video instructions: https://www.youtube.com/watch?v=PMBWEESVocA
By following the 6 steps - you inject all, essential ingredients your air conditioning system needs for smooth and uninterrupted operation:
- Shake the container to mix all the COOL5 substances
- screw on the included hose with pressure gauge
- Znajdź port serwisowy niskiego ciśnienia (o średnicy 13 mm lub 17 mm i oznaczony LP) pod maską samochodu i odkręć nakrętkę LP. Poszukaj portu LP na aluminiowej rurze układu klimatyzacji znajdującej się wokół silnika (zwykle znajduje się tuż za przednią maską)
- Plug the plastic end of the hose into the low pressure port (letters LP)
- turn the container upside down and start loading the contents
- stop when the pressure gauge shows 40-45 psi (halfway along the green field of the clock)
- Do not turn off the engine and cooling system, allowing COOL5 to reach its full efficiency and performance as described in the steps listed below.
-
- SHAKE the container to mix all substances contained in COOL5.
-
- SCREW the hose with the pressure gauge onto the can with the preparation.
-
- FIND the low pressure (LP) service port under the hood of your car and attach the plastic hose end.
-
- TURN the container with its contents upside down and start loading the preparation.
-
- FINISH When the pressure gauge reads 40–45 PSI, stop what you are doing.
-
- WAIT Do not switch off the engine or cooling system, allowing the product to reach full efficiency and effectiveness.
